SULPHOCHEM

 SULPHUR TYPE CHEMICAL RESISTANT CEMENT MORTAR
 

Sulphochem is Sulphur  based  mortar  containing  plasticizer and inert fillers. The molten mortar is extremely fluid and pours quite easily without lumps.

Sulphochem ingots are broken and are placed in a suitable clean, dry kettle. It is melted over low heat by stirring with metal rod. If Sulphochem is over heated or ignited a tight cover or wet gunny bags shall be kept ready for use in case of fire. Sulphochem mortar burns with a low blue flames. If this should be happen heating should be stopped and the vessel should be covered with the lid or wet gunny bags, until the fire is extinguished.

If the mortar thick on over heating it should be allowed to cool and stirred until thin. Care shall be taken that water or damp mortars do not fall or mixed in the heating vessel so as to avoid foaming.

APPLICATION:

The  surface  shall  be  laid  first  with  inter  liner the Acid proof bricks shall be placed on spacer chips. Molten  Sulphochem  mortar  shall  be  poured  through  joints of bricks. In case of vertical surface  joints  of bricks  are covered by applying the paper with adhesive. Sulphochem mortar is poured between the wall surface and bricks.

CHEMICAL RESISTANCE OF SULPHOCHEM MORTAR :

Sulphochem is resistant to oxidizing acids , non-oxidizing acid. The carbon filled Sulphochem has good resistance to Hydrofluoric acid or Fluoride salts.

   FOR ANY TECHNICAL ASSISTANCE PLEASE CONTACT US.

“  THE BASIC MANTRA FOR WORK IS QUALITY WORK WITH 100% SATISFACTION OF CUSTOMERS  ”