(Anticorrosive coating)
two pack systems, i.e. Resin and Hardener, mainly
developed for its versatile use as anti - corrosive
coating in chemical, fertilizer, pulp & paper, and
pharmaceutical industries. It is a combination of Epoxy
Resin, Coal-Tar, Cardinal and Hardener.
Epochem – C (CTCN)
is two component system applications. These two
components are mixed before application in equal proportion
by volume. Therefore, the process of weighting odd
quantities of resin and Hardener is eliminated. It can
be applied directly over neat and cleaned surface as primer
and finish coat.
Surface Preparation:
For better adhesion it is essential to clean the surface
on which Epochem-C (CTCN)is to be applied. to remove dust
dirt or loose particle by emery paper, wire brush or power
tools. To get optimum performance surface must be dry, free
from oil grease and sufficiently roughened.
Field Of Application:
• M. S. Structure for Corrosive chemical
Industries
• M. S. Grills & gates for Residence
& Hotels at coastal Zones
Characteristics of the Coating:
-
Ratio :
Resin and Hardener 1:1 part by volume
-
Pot Life of
mix: 30 TO 50 minutes at 35`C temp.
-
Viscosity of
mix : 2000-4000 CP (Very convenient for brush application)
-
Coverage:
Mild Steel 3-4 Sq.Mtr./kg. With 200-250 Microns 2 coats.
-
Coats
recommended: Two coats at an interval of 24 hrs. Between the
coats.
-
Curing: Gets
completely cured at room temp. within 5-7 days
-
Visual
Appearance: On complete curing…………Glossy
Reddish Black.
-
Shelf-life :
Min 12 months stored at cool and dry place in sealed
containers
Precaution:
Mix only required quantity of the material, which
can be utilized within stipulated spot life for period
avoids solidification. Wash all tools and tackles with
Industrial solvents immediately after application is
completed.
FOR
ANY TECHNICAL ASSISTANCE PLEASE
CONTACT US.
|
