EPOCHEM-A

Epochem - A is a chemical setting Epoxy Resin based chemical resistant mortar .

Epochem - A sets  hard  and  bonds tenaciously to concrete and metals . It also exhibits superior adhesion to ceramic and glass surface .

Epochem - A when completely set , is  resistant  to all Non - Oxidizing  acids , low concentrations of oxidizing acids , all alkalies , salts , oils , greases , and some solvents at temperature upto 120 degree C. It is not recommended  for use with concentrated oxidizing acids and agents , Ketones and other organics such as chloroform.

Application :

Epochem - A mortar is prepared by combining Epochem - A  resin  with  Epochem  Hardener  and than after mixing with Epochem powder to form a workable mix.

GENERAL DIRECTION FOR PREPARATION OF EPOCHEM - A MORTAR

PRIMER

             Epochem - A Resin                       100 P.B.W.

             Epochem Hardener - P                   50 P.B.W.

MORTAR

             Epochem - A Resin                       100 P.B.W.

             Epochem Hardener - M                   60 P.B.W.

             Epochem Powder                          850 P.B.W.

USE OF EPOCHEM - A MORTAR

Epochem - A mortar is widely used for laying Acid proof  brick/tile  lining . It  is  also  successfully used for  jointing  Chemical  Resistant  Stoneware  Pipes . When Epochem - A mortar is used for bedding of the brick or tile can be laid on primed surface.

The major  use  of  Epochem - A  mortar is  for  pointing  to Acid/Alkali  Resistant Mandana stone joints.

Epochem - A is also considered as pointing material to the Acid proof brick/tile .

Epochem - A mortar adheres strongly when applied on the concrete  surface , therefore it can be used as a monolithic lining in plant area , main hole , chambers and for Effluent tanks.

 FOR ANY TECHNICAL ASSISTANCE PLEASE CONTACT US.